Grove – Serial Camera Kit 包含一塊電路板，一個平角鏡頭以及一個廣角鏡頭。兩個可替換的鏡頭。電路板採用CJ-OV528攝像機模組。CJ-OV528是一款基於RS485總線、RS232接口的彩色監控終端。模組總線採用半雙工通信，可以支持7台設備實現多點監控。Grove – Serial Camera Kit包含一個平角鏡頭及一個廣角鏡頭，適用於不同需求的監控場合。電路板採用了標準4pin Grove接口，通過Base Shield可以方便的與Arduino/Seeeduino進行連接，通過串口即可讀取圖像數據，從而可以進行一些圖像處理方面的工作，使得Grove – Serial Camera Kit成為一款非常適合Arduino/Seeeduino使用的攝像產品。
The STM32F765VI ARM Cortex M7 processor running at 216MHz with 512KB of RAM and 2MB of flash. All I/O pins output 3.3V and are 5V tolerant.
A full-speed USB (12Mbs) interface to your computer; your OpenMV Cam will appear as a virtual COM port and a USB flash drive when plugged in.
A μSD card socket capable of 100Mbs reads/writes, which allows your OpenMV Cam to record video and easily pull machine vision assets off of the μSD card.
A SPI Bus that can run up to 54Mbs, allowing you to easily stream image data off the system to either the LCD shield, the WiFi shield or another microcontroller.
An I2C Bus, CAN Bus and Asynchronous Serial Bus (TX/RX) for interfacing with other microcontrollers and sensors.
A 12-bit ADC and a 12-bit DAC.
Three I/O pins for servo control.
Interrupts and PWM on all I/O pins (there are 10 I/O pins on the board).
RGB LED and two high-power 850nm IR LEDs.
The OV7725 image sensor is capable of taking 640×480 8-bit grayscale images or 320×240 16-bit RGB565 images at 30 FPS. Your OpenMV Cam comes with a 2.8mm lens on a standard M12 lens mount. If you want to use more specialized lenses with your OpenMV Cam, you can easily buy and attach them yourself.