SparkFun ProtoShield Kit 原型擴展套件組

-9%

SparkFun ProtoShield Kit 原型擴展套件組

NT$470 NT$430 (未稅)

  • All Arduino pins are brought to the top level
  • 5V, GND, and Vin pins are exposed as well
  • BlueSMiRF socket for wireless communication between Arduinos
  • 2 general use LEDs
  • 1 general use button
  • Reset button brought to top level

描述

SparkFun ProtoShield Kit 原型擴展套件組 美國 SparkFun 原裝進口

ProtoShield 最初與SFE和ITP @ NYU的人員合作,與Arduino USB板配合使用,為用戶提供了一個小的焊接區域,兩個通用的LED,一個BlueSMiRF插座,一個普通的按鈕開關,以及最重要的所有 – Arduino重置開關被帶到頂層。一個 ProtoShield快速入門指南 可用!

這是套件形式,必須由最終用戶焊接在一起。請注意 – 我們不提供組裝說明,但您可以 在這裡 找到一個大而乾淨的拍照組裝指南!下面列出了一些彙編的教程。所有的焊接都是通孔(比較容易),但是在焊接之前總要檢查元件的方向。

該套件帶有麵包板選項。我們強烈推薦這款麵包板!請參閱下面的相關項目,了解麵包板的所有豐富多彩的選項。

注意: SparkFun ProtoShield套件不包括Uno R3 SDA和SCL的孔

出貨包含

  • 1個ProtoShield裸露的PCB
  • 2個可堆疊接頭6針
  • 2個可堆疊接頭8針
  • 2x 5毫米基本黃色LED
  • 2x 330歐姆電阻
  • 1個10k電阻
  • 2個瞬時按鈕
  • 2個0.1uF陶瓷電容器

規格與特色

  • 所有的Arduino引腳都被帶到了頂層
  • 5V,GND和Vin引腳也是暴露的
  • 用於Arduinos之間無線通信的BlueSMiRF插座
  • 2個通用LED
  • 1個一般使用按鈕
  • 重置按鈕進入頂層

原廠技術文件與範例

SparkFun ProtoShield Kit

Riding on the waves of the very popular Arduino USB board is this small prototyping shield. Originally spawned with collaboration between the folks at SFE and ITP @ NYU, the ProtoShield mates with the Arduino USB board and gives the user a small soldering area, two general LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and most important of all – the Arduino reset switch is brought to the top level. A ProtoShield quickstart guide is available! This comes in kit form and must be soldered together by the end user. Please note – we do not ship assembly instructions, but you can find a big, clean photographed assembly guide here! There are a few tutorials on assembly listed below. All soldering is through-hole (relatively easy) but always check your component orientation before soldering! The kit is pictured with the bread-board option. We highly recommend this breadboard! See the related items below for all the colorful options of breadboards you have. Note: The SparkFun ProtoShield Kit does not include the holes for the Uno R3 SDA and SCL.

FEATURES

  • All Arduino pins are brought to the top level
  • 5V, GND, and Vin pins are exposed as well
  • BlueSMiRF socket for wireless communication between Arduinos
  • 2 general use LEDs
  • 1 general use button
  • Reset button brought to top level

INCLUDES

  • 1x ProtoShield bare PCB
  • 2x Stackable Headers 6-pin
  • 2x Stackable Headers 8-pin
  • 2x 5mm Basic Yellow LEDs
  • 2x 330 Ohm resistors
  • 1x 10k resistor
  • 2x Momentary push buttons
  • 2x 0.1uF Ceramic Capacitors

DOCUMENTS

商品評價

目前沒有評價。


搶先評價 “SparkFun ProtoShield Kit 原型擴展套件組”

  • 本網站所提到的產品規格、應用程式、圖片及資訊僅提供參考,內容會隨時更新,恕不另行通知。
  • 商標聲明:本網站所談論到的產品名稱僅做識別之用,而這些名稱可能是屬於其他公司的註冊商標或是版權。
您已經成功購買本項商品: