1.5W 5.5V 270mA 太陽能充電板 1.5W Solar Panel 81X137

-13%

1.5W 5.5V 270mA 太陽能充電板 1.5W Solar Panel 81X137

NT$230 NT$200

描述

1.5W 5.5V 270mA 太陽能充電板 1.5W Solar Panel 81X137

1.5W 5.5V 270mA 太陽能充電板 該太陽能電池板由單晶材料製成,具有17%的高太陽能轉換效率。它具有精細的樹脂表面和堅固的背部,適合戶外環境。一個2mm JST連接器連接到刑,這使得它與我們的大多數可用太陽能電源板(如 Arduino 微控制器系列,  Lipo Rider充電板系列和  XBee運營商WSN產品系列)合作是  完美的。
典型的開路電壓約為5V,具體取決於光強度。在晴朗的天空和大陽光的燦爛夏日里,峰值OC電壓可以高達10V。為防止對接受窄範圍輸入電壓的電路板造成損壞,如Lipo Rider,建議在連接前檢查OC電壓是否安全。
1.5W 5.5V 270mA 太陽能充電板
特徵
  • 尺寸:137x81x2.5(±0.2)mm
  • 典型電壓:5.5V
  • 典型電流:270mA
  • 開路電壓:8.2 V
  • 最大負載電壓:6.4V

1.5W Solar Panel 81X137 5.5V 270mA

This solar panel is made of single-crystal material that performs high solar energy transformation efficiency at 17%. It has a fine resin surface and sturdy back suitable for outdoor environments. A 2mm JST connecter is attached to the penal, which makes it perfect to team up with most of our can-use-solar-power-supply boards, like aduino microcontroller series, Lipo Rider charging boards series and XBee carrier WSN products series.
The typical open circuit voltage is around 5V, depending on light intensity. In those bright summer days with clear sky and big sun, the peak OC voltage can rush up to 10V. To prevent any damage to boards that accept a narrow range of input voltage, like Lipo Rider, it’s recommended to check whether the OC voltage is safe before any connection.
Features
  • Dimensions: 137x81x2.5(±0.2) mm
  • Typical voltage: 5.5V
  • Typical current: 270mA
  • Open-circuit voltage: 8.2 V
  • Maximum load voltage: 6.4V

Technical Details

Dimensions0mm x 0mm x 0mm
WeightG.W 48g
BatteryExclude

ECCN/HTS

ECCN3A991.o
HSCODE8541402000

Certification

RoHSCompliant

商品評價

目前沒有評價。


搶先評價 “1.5W 5.5V 270mA 太陽能充電板 1.5W Solar Panel 81X137”

您已經成功購買本項商品: